QHY16200A Mono Camera, with Filter Wheel and OAG

Be the first to review this product

$3,999.00

Quick Overview

QHY16200A/IC16200A uses a unique APS-H CCD sensor, a product of close collaboration between QHYCCD and Sensor Supplier .


This sensor is specially designed and manufactured with amateur astronomers in mind who needs mono sensor larger than APS-C. APS-H Format CCD Sensor


The effective image area is 27mm*21.6mm. To compare with the QHY8L APS-C format 23.4*15.8, the APS-H sensor is significantly bigger.


The reason to make such a sensor is due to no such mono sensor between 8300(4/3inch) to 11002(full size).


This sensor is 16mega pixels. The APS-H format is suitable for most telescope and also suitable for 2inch fitlers.


The pixel size of this sensor is 6.0um*6.0um.It silightly bigger than the 8300's 5.4um.


The QE is expected to similar or higher than 8300.


The 37ke fullwell is much higher than the 25.5ke of 8300.

QHY16200A Mono Camera, with Filter Wheel and OAG

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

$3,999.00

Details

CCD Sensor APS-H 16.2mega

CCD sensor Standard Grade

Effective Pixels 4540(H)*3630(V),16mega pixels

Pixel Size 6.0um*6.0um

Effective Area 27.0mm(H)*21.6mm(V), APS-H format

Readout Type Full Frame CCD, Progressive Scan

FullWell Typical 41ke

ADC 16bit

Readout Noise Typical 10 e

System Gain 0.7e/adu

Binning 1x1,2x2,4x4

Anti-Blomming 2000X of saturated

Thermal Noise 0.04e/pixel/sec @ -20C

Exposure Time 1ms-10000sec

TEC 2 stage Cooling Typical -40 below Ambient

Shutter Butterfly Mechanical Shutter with Uniform illumination

Moisture Control Air Connector for removable silicon gel tube

Heat board for optic window of airproof CCD chamber

Built-in Filter Wheel 5 position 2inch/50mm or 7 position 2inch/50mm

OAG interface six M3 scew holes for QHYOAG

Telescope Interface M54/0.75 inner screw

Power consumption 0% cooling 8W 50% cooling 16.5W 100% cooling 27W

Supported Filters 2inch mounted filter of 5position:Maxium 6mm filter holder(thread of the holder not included) 2inch mounted filter of 7position: Maxium 9mm filter holder(thread of the holder not included) 50mm unmounted glass of 5 position: 0-5mm thickness 50mm unmounted glass of 7 position: 0-8mm thickness

Weight 1550g (standard CFW5 version), no OAG included 2330g (CFW7 version), no OAG included

Additional Information

Free Shipping Yes

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

>